HPH1200
HYDRAULIC PILING HAMMER
• Fast hammer blow rate for rapid pile penetration
• Full energy monitoring on screen
• Full history of hammer performance
• Highly reliable and robust electrical switching
• Intelligent stroke control
• Very few serviceable parts, with on screen fault diagnostics
• Easily maintained by Diesel / Mechanical fitter
• Cushion block irons out peak stresses
• Very efficient energy transfer
| SPECIFICATION | UNITS | HPH1200 |
|---|---|---|
| RAM WEIGHT | kg | 1,040 |
| lbs | 2,300 | |
| IMPACT VELOCITY | m/s | 4.76 |
| ft/s | 15.60 | |
MAXIMUM ENERGY TRANSFERED TO PILE |
KNm | 12.0 |
| ft lb | 8,680 | |
MINIMUM ENERGY TRANSFERED TO PILE |
KNm | 6.2 |
| ft lb | 4629 | |
| BLOW RATE | bpm | 80-120 |
LENGTH - LEAD MOUNTED |
mm | 3,800 |
| in | 150 | |
| MINIMUM WIDTH OF BODY | mm | 406 |
| in | 15.98 | |
WEIGHT - LEAD MOUNTED |
kg | 3,000 |
| lbs | 6,600 | |
WEIGHT - WITH SHEET PILE LEG GUIDES + SPREADER PLATE |
kg | 3,000 |
| lbs | 6,600 |
PILE CONFIGURATIONS
. ALL LARSSEN SHEET PILES IN SINGLES/PAIRS WITH STD LEG INSERTS.
. ALL FRODINGHAM SHEET PILES IN SINGLE/PAIRS WITH STD LEG INSERTS.
. H-PILES 305x305 UPWARDS WITH STD LEG INSERTS
. H-PILES SMALLER THAN 305x305 WITH SPECIAL LEG INSERTS.
. CONCRETE & TIMBER PILES UP TO 350x350 WITH STD LEGS
. TUBULAR PILES UPTO Ø410 WITH STD LEGS
SPECIAL LEGS & INSERTS AVAILABLE ON REQUEST
DAWSON POWERPACK
| SPECIFICATION | UNITS | DAWSON |
|---|---|---|
| DIESEL ENGINE POWER | kW | 93 |
| rpm | 2,100 | |
| HYDRAULIC SYSTEM PRESSURE | bar | 240 |
| psi | 3480 | |
OIL FLOW RATE |
L/min | 75 |
SIZE - LENGTH x WITH x HEIGHT |
m | 2.85 x 1.34 x 2.26 |
| in | 112 x 53 x 89 | |
| WEIGHT | kg | 3000 |
| lbs | 6,600 | |
| FUEL CAPACITY | litres | 275 |
FUEL CONSUMPTION @60% |
litres / hour | 15.2 |
For a HPH1200 PDF specification sheet ........(click here)
home